Health risk assessment of hexachlorocyclohexane in soil,water and plants in the agricultural area of Potohar region,Punjab, Pakistan

Environmental Geochemistry and Health - As the largest organ of the human body, the skin is the major exposure route of NO2. However, the evidence for a relationship between NO2 exposure and...     

A metric-based assessment of climate and tourism in major cities of Pakistan

Environment, Development and Sustainability - Tourism plays an essential role in the economic development of a country and has become a growing phenomenon of global importance. The climate change...     

Endosulfan is toxic to the reproductive health of male freshwater fish, <Emphasis Type="Italic">Cyprinion watsoni</Emphasis>

Endosulfan is an organochlorine pesticide that is toxic to aquatic life. Endosulfan might hamper the reproductive health of indigenous fish in agricultural areas of Pakistan where this pesticide is sprayed widely. The aim of the current study is to investigate the toxic effects of endosulfan on selected reproductive parameters of male freshwater fish, Cyprinion watsoni. Two concentrations of endosulfan (0.5 and 1 ppb for 30 days exposure) were tested for their effects on body weight, body length, and testicular weight, length, and width. Testicular testosterone was assayed from tissue extracts using enzyme immunoassay (EIA). A significant increase in the mortality rate was observed in both treated groups during both spawning and quiescent seasons. The overall behavior of fish in the aquarium was normal in all control and treated groups. However, the treated fish exhibited anxiety after treatment with endosulfan. The body weight and length, and testicular weight, length and width were not significantly different to the control group. The testicular testosterone concentrations were significantly lower in both endosulfan-treated groups compared to the control. The decrease was dose-dependent, with a significant difference between the two treated groups. The histomorphological results demonstrated various testicular alterations in the treated groups. These alterations included an increase in interlobular areas and clumping patterns in spermatocytes/spermatids. Because spermatids eventually differentiate into sperms, their low count will directly result in lower sperm count. Taken together, these results suggest that endosulfan is a toxicant that at least disturbs testosterone levels (possibly others) and negatively impacts the reproductive health of male freshwater fish.     

Potential Fluoride Contamination in the Drinking Water of Naranji Area, Northwest Frontier Province, Pakistan

The drinking water of Naranji village and surrounding areas of the NorthWest Frontier Province (NWFP), Pakistan, was analyzed for its fluoride content. The fluoride content of water samples from the springs in the Naranji village goes up to 13.52 mg kg(-1), which exceeds the permissible limit (1.5 mg kg(-1)) set by the World Health Organization (WHO). This study explores the source of fluoride contamination and attributes it to the alkaline rocks of the Ambela granitic complex and the Koga complex. The low-lying areas towards the south have a fluoride content within the permissible limit. The Naranji area therefore needs urgent remedial measures.     

HYDROLOGIC UNCERTAINTY MEASURE AND NETWORK DESIGN1

ABSTRACT: This paper presents a simple methodology, using the entropy concept, to estimate regional hydro logic uncertainty and information at both gaged and ungaged grids in a basin. The methodology described in this paper is applicable for (a) the selection of the optimum station from a dense network, using maximization of information transmission criteria, and (b) expansion of a network using data from an existing sparse network by means of the information interpolation concept and identification of the zones from minimum hydrologic information. The computation of single and joint entropy terms used in the above two cases depends upon single and multivariable probability density functions. In this paper, these terms are derived for the gamma distribution. The derived formulation for optimum hydrologic network design was tested using the data from a network of 29 rain gages on Sleeper River Experimental Watershed. For the purpose of network reduction, the watershed was divided into three subregions, and the optimum stations and their locations in each subregion were identified. To apply the network expansion methodology, only the network consisting of 13 stations was used, and feasible triangular elements were formed by joining the stations. Hydrologic information was calculated at various points on the line segments, and critical information zones were identified by plotting information contours. The entropy concept used in this paper, although derived for single and bivaviate gamma distribution, is general in type and can easily be modified for other distributions by a simple variable transformation criterion.     

Succinate-bonded pullulan: An efficient and reusable super-sorbent for cadmium-uptake from spiked high-hardness groundwater

Chemically modified pullulan was evaluated for its sorption efficiency and selectivity to remove cadmium(Cd) from spiked high-hardness groundwater(GW). Pullulan esterified with succinic anhydride using dimethylaminopyridine showed a fairly high degree of substitution value as confirmed by1 H NMR spectroscopy. Pullulan succinate(Pull-Suc) was converted into the sodium salt(Pull-Suc-Na). The effect of contact time(5–200 min) and p H(2–8) on Cd-uptake by the sorbent(Pull-Suc-Na) was investigated. The sorbent showed more than 90% Cd-removal in first 15 min from distilled water(DW) and GW solution,respectively. Comparison of Pull-Suc-Na with other polysaccharidal sorbents suggested its high efficiency(DW 476.2 mg/g and GW 454.5 mg/g) and selectivity for the removal of Cd by an ion exchange mechanism, which is further supported by the negative Gibbs free energy values calculated from Langmuir isotherms. A Langmuir isotherm kinetic model provided the best fit for the sorption of Cd using Pull-Suc-Na. The sorbent showed a negligible decrease in Cd-uptake over three regeneration cycles. The thermal stability testing of the sorbents indicated that Pull-Suc-Na(sorbent) is more stable than Pull-Suc.     

Some soil properties on coal mine spoils reclaimed with black locust (Robinia pceudoacacia L.) and umbrella pine (Pinus pinea L.) in Agacli-Istanbul

This study performed on randomly selected seven sample plots in leguminous black locust (Robinia pceudoacacia L.) plantations and five sample plots in umbrella pine (Pinus pinea L.) plantations on coal mine soil/spoils. Soil samples were taken from eight different soil depths (0–1, 1–3, 3–5, 5–10, 10–20, 20–30, 30–40, and 40–50 cm) into the soil profile. On soil samples, bulk density, fine soil fraction (Ø < 2 mm), sand, silt and clay rates, soil acidity (pH), organic carbon (C_org), and total nitrogen (N_t) contents were investigated. Also, some forest floor properties (unit mass, organic matter, and total nitrogen) were determined, and results were compared statistically between umbrella pine and black locust. As a result, 17 years after plantations, total forest floor accumulation determined as 6,107 kg ha^???1 under black locust compared to 13,700 kg ha^???1 under umbrella pine. The more rapid transformation of leguminous black locust forest floor creates organic carbon that migrates further into the mineral profile, and rapid accumulation of C and N in the soil profile was registered. Slower transformation processes of forest floor under umbrella pine result in lower soil N ratio and greater quantity of forest floor. Higher soil pH under leguminous black locust was determined significantly than umbrella pine. In conclusion, the composition of symbiotic nitrogen fixation of black locust appears to be a possible factor favoring carbon and nitrogen accumulation and, consequently, soil development. Clearly, both tree species have favorable impacts on initial soil formation. The umbrella pine generates the more forest floor layer; in contrast, black locust forest floor incorporates into the soil more rapidly and significantly increases soil nitrogen in upper soil layers.     

Recent advances in SO2, NOx, and O3 personal monitoring

Since the air pollution as measured by stationary monitoring stations is a poor indicator of the population exposure, personal monitors are indispensible to health effects studies. This article reviews the current research on the development of personal monitors. Although most of the analytical methods reviewed in this study appear to be sensitive to the levels of the target pollutants NO₂, SO₂, and O₃ generally encountered in indoor and outdoor air, they lack the desired performance characteristics for a personal monitoring device, such as user safety and ease of operation, weight, and maintenance. Electrochemical transducers/sensors, which have not yet been exploited, are attractive candidates for the application to personal monitoring. This technique has an added feature of generating real-time measurements. A few research models and commercially attractive devices that can be used in field studies are included.     

A holistic approach for optimal design of air quality monitoring network expansion in an urban area

This paper presents an objective methodology for determining the optimum number of ambient air quality stations in a monitoring network. The methodology integrates the multiple-criteria method with the spatial correlation technique. The pollutant concentration and population exposure data are used in this methodology in different ways. In the first stage, the Fuzzy Analytic Hierarchy Process (FAHP) with triangular fuzzy numbers (TFNs) is used to identify the most desirable monitoring locations. The network configuration is then determined on the basis of the concept of sphere of influences (SOIs). The SOIs are dictated by a predetermined cutoff value (r_c) in the spatial correlation coefficients (r) between the pollutant concentrations at the monitoring stations identified from first step and the corresponding concentrations at neighboring locations in the region. Finally, the optimal station locations are ranked by using combined utility scores gained from the first and second steps. The expansion of air quality monitoring network of Riyadh city in Saudi Arabia is used as a case study to demonstrate the proposed methodology.     

Removal of Fe(II) from the wastewater of a galvanized pipe manufacturing industry by adsorption onto bentonite clay

Bentonite clay has been used for the adsorption of Fe(II) from aqueous solutions over a concentration range of 80-200 mg/l, shaking time of 1-60 min, adsorbent dosage from 0.02 to 2 g and pH of 3. The process of uptake follows both the Langmuir and Freundlich isotherm models and also the first-order kinetics. The maximum removal (>98%) was observed at pH of 3 with initial concentration of 100 mg/l and 0.5 g of bentonite. The efficiency of Fe(II) removal was also tested using wastewater from a galvanized pipe manufacturing industry. More than 90% of Fe(II) can be effectively removed from the wastewater by using 2.0 g of the bentonite. The effect of cations (i.e. zinc, manganese, lead, cadmium, nickel, cobalt, chromium and copper) on the removal of Fe(II) was studied in the concentration range of 10-500 mg/l. All the added cations reduced the adsorption of Fe(II) at high concentrations except Zn. Column studies have also been carried out using a certain concentration of wastewater. More than 99% recovery has been achieved by using 5 g of the bentonite with 3M nitric acid solution.